Midtronics Celltron ULTRA Instruction Manual page 37

Celltron ULTRA
want to retest.
RETEST
7. Press the key.
8. After retesting, the analyzer will display the new results.
To retest another jar or strap, scroll to it and press the
RETEST
key.
BACK
9. Press the key to end.
Adding a placeholder for a missing or dead jar/
battery
You can create a placeholder for a dead or
m i s s i n g b a t t e r y b y u s i n g t h e A D D B AT T E RY
option in the REPORTS MENU. There are two ways to add a
placeholder.
NOTE: If you have selected JARS & 1 STRAP or JARS & 2
STRAPS as the test mode, you must also add a place-
holder for the strap.
When testing a string
1. When the analyzer displays the last good test results,
disconnect from the jar and press the
turn to the Main Menu. Select the TEST icon, and press
ENTER
.
2. The analyzer will display the following screen:
===WARNING===
CONNECT TO
RED LEAD TO POSITIVE
POST, BLACK LEAD TO
NEGATIVE POST!
PRESS '5' TO ADD JAR
NOTE: XX is the battery ID of the battery whose place is be-
ing taken.
3. If you press 5, the analyzer will add a placeholder to the
stored data readings:
Battery XX
BACK
key to re-
JAR XX
Voltage 0.0 volts
Conductance 0 mhos
When testing VOLTS THEN CONDUCTANCE, the PRESS
5 TO ADD JAR option is available only during the
voltage par t of the test. During conduc tance
te s t i n g t h e a n a l y ze r w i l l s k i p b at te r i e s w i t h
0 volts. You can add a placeholder by selecting the ADD
BATTERY option in the REPORTS menu at any time.
When testing is finished
You can add a placeholder later for a dead or missing battery
via the ADD BATTERY option in the REPORTS menu.
ARROW keys
1. Press the
the Main Menu, and press
2. In the STRING INFO screen press the
highlight a string name.
3. In the test results screen, scroll to the battery after
which you want the placeholder.
4. The analyzer will display:
INSERT PLACEHOLDER
AND SHIFT OTHER DATA?
The place holder will be:
Battery ID 0
VOLTAGE 0.0 volts
Conductance 0 mhos
NOTE: To add the placeholder at the end of
the data list, select the TEST icon, press
ENTER , and press the 5 key to add a jar.
37
• •
Chapter 6: Testing
to highlight the REPORTS icon in
ENTER
.
ARROW
0.0V and 0 MHOS
AT LOCATION
JAR XX
keys to