Midtronics Honda ED-18V3 Instructions

Honda ED-18V3 WiFi Setup
Summary
To save dealer manpower and reduce warranty claims rejected
for out-of-date software, Midtronics and American Honda are
implementing automatic software updating via WiFi for the ED-
18 Version 3 Battery Tester.
Initially all ED-18V3 analyzers were shipped with 802.11b WiFi
radios installed. Testers shipped since early 2014 use 802.11b/g
WiFi radios. While both perform adequately, some WiFi networks
no longer support 802.11b.
Refer to the FCC ID label on the tool to confirm which radio has
been installed in the tool.
On the ED-18, the label is to the left of the screen under the rubber
boot. The FCC ID for the b/g radio is W70MRF24WG0MAMB. Any
other ID is for the b radio only.
Older tools can be upgraded by purchasing and installing a WiFi
upgrade kit.
802.11b/g
ED-18V3 WiFi Upgrade
(dealer installed kit)
Please order via e-mail to order@midtronics.com. Include the
following information:
•
Ship to address
•
PO #
•
Bill to address
•
Part number (see above)
• Quantity
•
Dealer number
•
Contact Name, Email, and Phone
Please call Midtronics customer service at 866-592-8054 with
any questions.
www.midtronics.com
Honda ED-18V3
WiFi Upgrade & Setup
Use this guide to setup and connect an ED-18 V3 to a
WiFi network. This guide also contains specifications and
troubleshooting tips to ensure compatibility with BMIS.
Enabling WiFi
1.
2.
3.
Connecting To A WiFi Network
1.
Midtronics $122.00
P/N A324
2.
3.
Turn on the ED-18 by pressing the power button or con-
necting the test leads to a charged battery. If the tester's in-
ternal batteries are low, connect the test leads to a charged
battery.
Navigate to the Admin menu by selecting the following
menu options: "OPTIONS" > "SETUP" > "ADMIN"
⇒
At the Admin menu screen, press "5412" on the keypad to
enable the WiFi Setup menu option.
Turn on the ED-18 by pressing the power button or con-
necting the test leads to a charged battery. If the internal
battery is low on charge, connect the test leads to a charged
battery.
From the Main Menu, navigate to the WiFi Setup.
⇒ ⇒
Select a configuration slot, and then when prompted, select
the method for setting up your network connection.
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
Instructions Page
1
Instructions July 2016
167-000745EN-A
167-000745EN-A
July 2016
⇒
⇒