Midtronics Celltron ULTRA Instruction Manual page 23

Celltron ULTRA
ENTER
UP icon, and press
NOTE: If you select an option you do not want, press
TER
to return to the Main Menu.
ARROW
3. Use the keys to highlight the CLOCK icon, and
ENTER
press .
4. To highlight the characters you want to change, press
ENTER
. To move backward, press
ARROW keys
changes, press the
of the month, day, year, hour, and minutes.
5. To have the analyzer accept your changes, press
TER
to move past the minutes setting.
Adjusting the display contrast (CONTRAST
LEVEL)
ARROW keys
1. Press the
ENTER
UP icon, and press
ARROW keys
2. Press the
ENTER
and press .
ARROW keys
3. Press the
ENTER
and press .
ARROW keys
4. Press the
adjust the contrast from 0 (lightest) to 10 (darkest).
ENTER
5. Press to select.
Adjusting the display's backlight duration
(BACKLIGHT TIME)
This option turns off the screen illumination after a selected
period of time to conserve the analyzer's battery pack.
ARROW keys
1. Press the
ENTER
UP icon, and press
ARROW keys
2. Press the
ENTER
and press .
ARROW keys
3. Press the
ENTER
and press .
ARROW keys
4. Press the
.
BACK
. To make
to select the number
to highlight the UTILITIES SET-
.
to highlight the DISPLAY icon,
to highlight CONTRAST LEVEL,
(or use the numeric keys) to
to highlight the UTILITIES SET-
.
to highlight the DISPLAY icon,
BACK
to highlight LIGHT TIME,
(or use the numeric keys) to
adjust the time the display stays
(off ) to 10 seconds.
EN-
ENTER
5. Press
Selecting the language (LANGUAGE)
T h e r e a r e s e v e n s e l e c t a b l e l a n g u a g e s i n t h e
Celltron ULTRA software for the display and printed
repor ts:
ARROW keys
1. Press the
UP icon, and press
EN-
ARROW keys
2. Press the
icon, and press
ARROW keys
3. Press the
move the dot to the option button of your choice.
ENTER
4. Press
Using UPDATE to install new software
This utility enables you to update the analyzer 's
s o f t w a r e u s i n g a n S D c a r d . C o n t a c t y o u r
Midtronics sales representative or Midtronics Customer service
for information about the current version.
To update the software from a SD card containing the
update files:
1. Insert the new memory card into the analyzer and press
POWER
the key.
2. FILE NOT FOUND will appear on the display.
BACK
3. Press the
ARROW keys
4. Press the
UP icon, and press
ARROW keys
5. Press the
ENTER
and press
6. SOFTWARE WILL BE CHANGED, DO YOU WANT TO CON-
TINUE? Press
ware.
NOTE: It will take several minutes to complete the update.
23
• •
Chapter 4: Utilities
back
lit from 0 seconds
to select.
to highlight the UTILITIES SET-
ENTER
.
to highlight the LANGUAGE
ENTER
.
(or use the numeric keypad) to
to accept.
key twice to display the Main Menu.
to highlight the UTILITIES SET-
ENTER
.
to highlight the UPDATE icon,
.
ENTER
to update the analyzer's soft-