Download Print this page
Midtronics PBT-200 Instruction Manual
Midtronics PBT-200 Instruction Manual

Midtronics PBT-200 Instruction Manual

For testing 12-volt automotive starting batteries

Advertisement

Quick Links

For service, contact Midtronics for a Return Authorization number, and return
the unit to Midtronics freight prepaid, Attention: RA#. Midtronics will repair or
replace the tester and reship, the next scheduled business day following
receipt, using the same type carrier and service as received. If Midtronics
determines that the failure was caused by misuse, alteration, accident, or
abnormal condition of operation or handling, purchaser will have the option
of purchasing a replacement tester or the unit will be returned freight collect.
Battery testers beyond the warranty period are subject to the repair charges
in effect at that time.
This tester is made in the U.S.A. by MIDTRONICS, INC. and is protected by
one or more of the following U.S. Patents: 6,323,650; 6,316,914; 6,304,087;
6,249,124; 6,163,156; 6,091,245; 6,051,976; 5,831,435; 5,821,756; 5,757,192;
5,592,093; 5,585,728; 5,572,136; 4,912,416; 4,881,038; 4,825,170; 4,816,768;
4,322,685; Canadian patents: 1,280,164; 1,295,680; United Kingdom patents:
0,417,173; 0,672,248; German patents: 689 23 281.0-08; 693 25 388.6;
93 21 638.6; and other U.S. and Foreign patents issued and pending. This
product may utilize technology exclusively licensed to Midtronics, Inc. by
Johnson Controls, Inc. and/or Motorola, Inc.
Limited Warranty
This battery tester is warranted to be free of defects in materials and
workmanship for a period of one year from the date of purchase. Midtronics
will, at our option, repair the unit or replace the unit with a remanufactured
tester. This limited warranty applies only to Midtronics battery testers and does
not cover any other equipment, static damage, water damage, overvoltage,
dropping unit or damage resulting from extraneous causes including owner
misuse. Midtronics is not liable for any incidental or consequential damages
for breach of this warranty. The warranty is void if owner attempts
to disassemble the unit, or to modify the cable assembly.
Midtronics, Inc.
7000 Monroe Street
Willowbrook, IL 60527
U.S.A.
Tel:
(630) 323-2800
Fax:
(630) 323-2844
ISO 9001 Certified
Service
Patents
Midtronics b.v.
Lage Dijk-Noord 6
3401 VA IJsselstein
The Netherlands
Tel.: +31 306 868 150
Fax: +31 306 868 158
ISO 9002 Certified
For testing 12-volt automotive starting batteries
rated in CCA, SAE, DIN, IEC, and EN
INSTR
INSTR
UCTION M
UCTION M
INSTR
INSTRUCTION M
INSTR
UCTION MANU
UCTION M
P/N 168-138A 01/02
ANU
ANU
AL
AL
ANUAL
ANU
AL
AL
©
.
2002 Midtronics, Inc

Advertisement

loading

Summary of Contents for Midtronics PBT-200

  • Page 1 Battery testers beyond the warranty period are subject to the repair charges in effect at that time. Patents This tester is made in the U.S.A. by MIDTRONICS, INC. and is protected by one or more of the following U.S. Patents: 6,323,650; 6,316,914; 6,304,087; 6,249,124; 6,163,156; 6,091,245; 6,051,976; 5,831,435; 5,821,756; 5,757,192;...
  • Page 2 200 – 900 A EN more battery cells are bad. Replace the battery. * For JIS, use the conversion table on the back of the PBT-200. A CONN message means there is a bad connection. Disconnect the clamps and reconnect. Make sure to rock the clamps back and forth RATING SYSTEM SELECTION PROCEDURE to make a good connection.