Midtronics Celltron ULTRA Instruction Manual page 13

Celltron ULTRA
TRANSFER (icon)
Press ENTER to transfer test results to a PC via the infrared (IR) receiver
in the Celltron ULTRA kit.
TRANSFER DATA (check boxes)
TRANSFER ALL DATA
Transfer all test data in memory.
SELECT FILE (scrolling)
Transfer the test data for a string.
ADD BATTERY
Select this option to create a placeholder in the test results for a dead or missing battery when you are finished
testing.
STRING INFO (scrolling)
Select a string name and press
JAR ID [number/letter] (scrolling)
Scroll to the jar number after which you want to insert a placeholder, and press
selected JARS & 1 STRAP or JARS & 2 STRAPS as the test mode, you must also add a placeholder for the
strap.
WARNING
The analyzer will ask you to verify the location before creating the placeholder. Press
continue or the
TEST COUNTER (icon)
ENTER
Press to see the total number of tests performed since the analyzer was first used.
REPORTS (menu icon)
VERSION (icon)
ENTER
Press to display the serial numbers of the analyzer, cable, flash memory, and EEPROM firmware versions.
The information will be helpful when you call Midtronics for software updates, service, and parts.
UTILITIES SETUP (menu icon)
ENTER
Press to display the UTILITIES SETUP menu. This menu has seven utilities, four of which support the test
process.
WARNING (icon)
ENTER
Press to select a percentage of the reference value below which a jar and string must fall to generate a
warning or failure notice.
STRING INFO (scrolling)
Select a site name and press
STRING INFO (scrolling)
STRING WARN
ENTER
Press .
STRING INFO (scrolling/numeric)
Select from 0 to 100%.
STRING FAIL
ENTER
Press
ENTER
to display the string's test results.
BACK
key to cancel.
ENTER
.
.
13
• •
Chapter 2: Description
nd the PC software included
a
ENTER
. If you have
ENTER
to