Web Configuration Utility; Web Configuration Utility; Menu Examples - Digital Projection HIGHLITE 660 3D series User Manual

Digital Projection
HIGHlite 660 3D Series
Web Configuration Utility
The LAN IP Address of the projector can be set by using the
Once the LAN IP Address has been set, it is possible to control all the functions available on the OSD by using the embedded Web
Configuration Utility.
To access the Web Configuration Utility, do one of the following:
•
Type the URL http://<LAN IP Address> into the address bar of your browser, then press
•
Use the DiscoveryTool_V1.0.exe application.
The embedded webpage shown below right should appear.

Menu examples

The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the
projector's MAC Address are
shown in the , 00-3E-7A
Unit ID
in the example shown here.
•
The menu name is shown in
orange underlined text, as in the
shown here.
Main Menu
•
Drop-down lists are represented
by similar drop-down lists, as in
the Input Selection list shown
here.
•
Sub-menus are represented
by yellow underlined links, as
shown here.
Rev A December 2013

WEB CONFIGURATION UTILITY

Network sub-menu, which can be found in the
ENTER
Setup menu.
.
Remote Communications Guide
Notes
For full details of how to use the
menu system, see Using The
Menus in the Operating Guide.
See Using the Discovery Tool
to view your network later in this
section.
99