Table of Contents
Advertisement
Digital Projection Mercury Quad Series
Web Configuration Utility
Use the embedded Web
Configuration Utility to control the
projector via a LAN network:
1.
Make sure the projector
is connected to a remote
computer via LAN.
2.
From the remote computer,
access the LAN IP address
of the projector. The Web
Configuration Utility opens.
The utility's features are arranged
in the following tabs:
Projector Status
1
View projector and
network information.
Projector Control
2
Access various projector
settings.
Network Setup
3
View and configure
network settings.
Alert Mail Setup
4
Set up error warnings and
regular status reports by
email.
Operating Guide
1
2
3
4
WEB CONFIGURATION UTILITY
Notes
The default LAN IP address is
192.168.0.100.
If you suspect this has been
changed, view the current
Network
settings in the
menu.
Setup
For more information about
connecting the projector via LAN,
see the Connection Guide.
Rev A March 2017
page 81
Advertisement
Table of Contents
