Digital Projection
HIGHlite 730 & 740 Series
Web Configuration Utility
The LAN IP Address of the projector can be set by using the
Once the LAN IP Address has been set, it is possible to control all the functions available on the OSD by using the embedded Web
Configuration Utility.
To access the Web Configuration Utility, do one of the following:
•
Type the URL http://<LAN IP Address> into the address bar of your browser, then press
•
Use the DiscoveryTool_V1.0.exe application.
The embedded webpage shown below right should appear.
Menu examples
The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the projector's
MAC Address are shown in the
, 00-27-86 in the example
Unit ID
shown here.
•
The menu name is shown in
orange underlined text, as in the
shown here.
Main Menu
•
Drop-down lists are represented
by similar drop-down lists, as in
the
Input Selection
list shown
here.
•
Sub-menus are represented by
yellow underlined links, as shown
here.
Rev E March 2014
WEB CONFIGURATION UTILITY
Network
submenu, which can be found in the
ENTER
Setup
menu.
.
Remote Communications Guide
Notes
See
Using the Discovery Tool
to view your network
later in this
section.
89