Digital Projection
E-Vision 7500 Series
Web Configuration Utility
Use the embedded Web Configuration Utility
to control the projector via a LAN network:
1.
Make sure the projector is connected to a
remote computer via LAN.
2.
From the remote computer, access the
default LAN IP address of the projector.
The Web Configuration Utility opens.
Projector Info
1
Shows projector and network
information.
Alert Mail Settings
2
Allows you to set up error warnings
and regular status reports by email.
Crestron
3
Provides access to projector
controls
Rev D July 2014
WEB CONFIGURATION UTILITY
1
2
3
Remote Communications Guide
Notes
If
is set to
Eco Network Power
Eco
, the LAN connection will be
disabled when the projector is in
STANDBY mode. To enable power
on via LAN, set
Eco Network
Power
to
Standard
.
The default LAN IP address is
XXX.
XXX.X.XXX
If you suspect this has been
changed, then you can view the
current
Network
settings in the
Control Menu
.
For more information about
connecting the projector via LAN,
see the Connection Guide.
73