Digital Projection
Titan Quad / 930 / 800 Series
Web Configuration Utility
The LAN IP Address of the projector can be set by using the
Once the LAN IP Address has been set, it is possible to control all the functions available on the OSD by using the embedded Web
Configuration Utility.
To access the Web Configuration Utility, do one of the following:
•
Type the URL http://<LAN IP Address> into the address bar of your browser, then press
•
Use the DiscoveryTool_V1.0.exe application.
The embedded webpage shown below right should appear.
Menu examples
The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the projector's MAC Address are shown in the
•
The menu name is shown in orange underlined text, as in the
•
Drop-down lists are represented by similar drop-down lists, as in the
•
Sub-menus are represented by yellow underlined links, as shown here.
Rev H October 2013
WEB CONFIGURATION UTILITY
Network
submenu, which can be found in the
ENTER
Unit ID
, 00-27-86 in the example shown here.
Main Menu
shown here.
list shown here.
Input Selection
Setup
menu.
.
Remote Communications Guide
Notes
For full details of how to use the
menu system, see
Using The
Menus
in the Operating Guide.
See
Using the Discovery Tool
to view your network
later in this
section.
108