Digital Projection
HIGHlite 660 3D Series
PIP menu
Two images can be combined, in three different ways using this feature. The PIP menu is available
only when
Setup
>
System
>
Configuration
Option
•
Select
PIP
,
PAP
, or
POP
mode from the drop-down list.
Input
•
Select an
Input
for the sub-image from the drop-down list. The inputs are divided into two groups
– the main image must be from one group, and the sub-image must be from the other group.
•
Group A:
COMPOSITE 1, COMPOSITE 2
•
Group B:
COMPONENT, VGA
The inputs from the same group as the main input signal will appear disabled in the list.
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen
from the
Custom
position the image manually.
PIP: Picture In Picture
Rev A December 2013
is set to
PIP
.
,
and
S-VIDEO
3G-SDI
,
,
and
DVI
HDMI
DVI-A
drop-down list, then you can use the sliders to
Position
PAP: Picture And Picture
USING THE PROJECTOR
POP: Picture Opposite Picture
Operating Guide
Notes
Main Menu
PIP
This menu is available only when
>
>
Setup
System
Configuration
set to
.
PIP
,
and
are NOT
PIP
PAP
POP
possible when
Input
is set to
Pattern
.
In these examples, the painting is
the main image, and the test pattern
is the sub-image, shown at the
Medium
size setting.
The
Position
settings apply ONLY
to
mode. PAP and POP are
PIP
always as shown in these examples.
is
Test
69