Web Configuration Utility; Menu Examples - Digital Projection Titan 800 3D series User Manual

Digital Projection
Titan 800 3D series
Web Configuration Utility
The LAN IP Address of the projector can be set by using the
Once the LAN IP Address has been set, it is possible to control all the functions available on the OSD by using the embedded Web
Configuration Utility.
To access the Web Configuration Utility, do one of the following:
•
Type the URL http://<LAN IP Address> into the address bar of your browser, then press
•
Use the DiscoveryTool_V1.0.exe application as described in Using the Discovery Tool to view your network later in this section.
The embedded webpage shown below right should appear.

Menu examples

The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the projector's MAC Address are shown in the
in the example shown here.
•
The menu name is shown in orange underlined text, as in the
here.
•
Drop-down lists are represented by similar drop-down lists, as in the
list shown here.
•
Sub-menus are represented by yellow underlined links, as shown here.
Rev A June 2012

WEB CONFIGURATION UTILITY

Network submenu, which can be found in the
ENTER
, 00-27-86
Unit ID
Main Menu shown
Input Selection
Setup menu.
.
Operating Guide
Notes
For full details of how to use the
menu system, see earlier in this
Guide.
Page Op_34