Table of Contents
Advertisement
Digital Projection E-Vision 6800 3D Series
Web Configuration Utility
Use the embedded Web Configuration
Utility to control the projector via a LAN
network:
1.
Make sure the projector is connected to
a remote computer via LAN.
2.
From the remote computer, access the
LAN IP address of the projector. The
Web Configuration Utility opens.
The utility's features are arranged in the
following tabs:
Projector Status
1
View projector and network
information.
Alert Mail Setup
2
Set up error warnings and regular
status reports by email.
Crestron
3
Access various projector controls
via the embedded Crestron
RoomView® functionality.
Opens in a new browser page.
PJLink
4
Set up security options for PJLink.
Remote Communications Guide
WEB CONFIGURATION UTILITY
1
2
3
4
Notes
If
is set to
, the
Standby Power
Off
LAN connection will be disabled
when the projector is in STANDBY
mode. To enable power on via LAN,
set
Setup > Network > Standby
to
.
Power
On
The default LAN IP address is
192.168.0.100.
If you suspect this has been
changed, then you can view the
current
Network
settings in the
Setup
menu.
For more information about
connecting the projector via LAN,
see the Connection Guide.
Rev A January 2015
page 58
Advertisement
Table of Contents
