Web Configuration Utility; Examples - Digital Projection Titan Pro Series III User Manual

Digital Projection
Titan Pro series III

Web Configuration Utility

The LAN IP Address of the projector can be set by using the
be found in the
Global Settings menu
Once the LAN IP Address has been set, it is possible to control all the functions available on
the OSD by using the embedded Web Configuration Utility:
•
Point your browser at the projector by typing the url
http://<LAN IP Address> into the address bar, then press the Enter key.
•
The embedded webpage shown below right should appear.

Examples

The webpages mirror the OSD menus, as shown in the following examples:
•
The last 3 bytes of the projector's
MAC Address are shown in the
00-26-AA in the example shown here.
•
The menu name is shown in orange,
underlined text, as in the
Main Menu
shown here.
•
Drop-down lists are represented by
similar drop-down lists, as in the
list shown here.
Selection
•
Sub-menus are represented by yellow
underlined links, as in the Global
sub-menu shown here.
Settings
Rev A May 2012
Network submenu, which can
.
Unit ID ,
Input
WEB CONFIGURATION UTILITY Operating Guide
Notes
For full details of how to use the
menu system, see earlier in this
Guide.
Page Op_25