Digital Projection
HIGHlite 660 3D Series
Infrared reception
The projector has infrared sensors at the front and back.
The angle of acceptance is 40°. Make sure that the remote control is within the angle of acceptance
when trying to control the projector.
Rev A December 2013
REMOTE CONTROL
Infrared reception
Installation and Quick-Start Guide
40°
Infrared reception is confirmed by
the blue IR LED flashing on the
control panel.
The infrared receivers are disabled
when a remote control is connected
via a cable. For more information,
see
40°
Connection Guide.
Notes
Wired remote control
in the
9