Table of Contents
Advertisement
4 Inch Speed Dome Installation Manual V2.0.0
4.2 Corner Mounting Instructions
The corner mounting is applicable to the indoor/outdoor 90° solid corner construction which should comply with the following
mounting requirements:
The wall must be thick enough to install the expansion screws.
The wall must be capable of supporting up to 8 times the total load of the dome and its accessories.
Step1: Install the corner adapter
Drill four holes in the corner according to the mounting locations, and then insert M6 expansion screws (not supplied) into the holes.
Pull the power cord, video cable and control line through the opening of the corner adapter. Secure the corner adapter to the corner by
using nuts and washers to tighten the four expansion screws.
Make sure the cables have enough length. For outdoor applications, please apply the sealant around the cable opening to prevent
Note:
water.
20
Advertisement
Table of Contents
