Table of Contents
Advertisement
4 Inch Speed Dome Installation Manual V2.0.0
6.2 Pendant Mounting Instructions
The pendant mounting is applicable to the indoor/outdoor solid ceiling construction which should comply with the following mounting
requirements:
The ceiling must be thick enough to mount the expansion screws.
The ceiling must be capable of supporting up to 8 times the total load of the dome and its accessories.
Step1: Install the mounting base
Drill four φ6 holes in the ceiling according to the fastener holes locations of the mounting base, and then insert M6 expansion screws
(not supplied) into the holes. Pull the power cord, video cable and control line through the opening at the mounting base. Secure the
mounting base to the corner by using nuts and washers to tighten the four expansion screws.
Make sure the cables have enough length. For outdoor applications, please apply water-proof measures between the ceiling
Note:
surface and mounting base and around the cables opening. The pendant mounting application is not recommended for outdoor
environment where directly suffers rain.
27
Advertisement
Table of Contents
