Table of Contents
Advertisement
21
4 Inch Speed Dome Installation Manual V2.0.0
Step2: Secure the wall mount to the corner
Apply four hex screws with the spring washers to the corner adapter through the wall mount and gasket.
When tightening the screw, it is better to compress the spring washer firstly and then rotate half a round so as to maintain
Note:
required waterproof effect without damaging the threads.
Step3: Install dome to the mount
Feed the cables through the opening on top of the back box, and attach the dome to the mount. Finally, use M3 screws to secure the
two units. Refer to Section 1.2 for installation instructions.
Follow the same instructions described above for the Short-arm Corner Mount installation. For outdoor applications, please
Note:
adopt the water-proof measures. The Short-arm Wall Mount is not recommended for outdoor applications.
Advertisement
Table of Contents
