HIKVISION US-4 Installation Manua page 29

4 Inch Speed Dome Installation Manual V2.0.0
Step2: Install the pendant pole
Swivel the pendant adapter into the matching pendant pole and then use the retainer screws to secure the two parts. Pull out the cables
through the pendant pole and screw the pendant pole into the mounting base and use the set screws to secure the two parts as well.
For outdoor applications, please apply the water-proof thread compound to the threads.
Note:
Step3: Install dome to the mount
Feed the cables through the opening on top of the back box, and attach the dome to the pendant pole, and finally use M3 screws to
secure the dome. Refer to Section 1.2 for installation instructions.
In case of insufficient ceiling height, directly attach the dome to the mounting base without use of pendant pole, as shown in the
Note:
figure right above.
28