TP-Link TL-MR6400 User Manual page 61

To add a new rule, follow the steps below.
1. Click the Add New... button, the next screen will pop-up as shown in Figure 4-39.
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
either TCP or UDP, or All.
5. Select Enable in Status field.
6. Click the Save button to save the new rule.
To modify an existing entry:
1. Click the Modify in the entry you want to modify.
2. Modify the information.
3. Click the Save button.
Click the Delete in the entry you want to delete to delete an existing entry.
Click the Enable All button to make all entries enabled
Click the Disable All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return the previous
page.

Note:
1) When the trigger connection is released, the according opening ports will be closed.
2) Each rule can only be used by one host on the LAN at a time. The trigger connection of
TL-MR6400
Figure 4-39 Add or Modify a Triggering Entry
300Mbps Wireless N 4G LTE Router
-49-