The Rear Panel - TP-Link TL-MR6400 User Manual

1.4.2 The Rear Panel

The following parts are located on the rear panel (View from left to right).
POWER: The Power socket is where you will connect the power adapter. Please use the

power adapter provided.
POWER ON/OFF: The switch for the power.

LAN (1, 2, 3): These ports (1, 2, 3) connect the router to the local PC(s).

LAN4/WAN: This port can be LAN or WAN port depending on the working mode.

WPS/RESET: This button is used for both WPS and RESET function.

•
Used as RESET button
With the router powered on, press and hold down the WPS/RESET button on the rear
panel of the router until the Power LED starts flashing. The router will restore and reboot
automatically.
•
Used as WPS button
If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup,
then you can press this button to quickly establish a connection between the router and
client devices and automatically configure wireless security for your wireless network.
WiFi ON/OFF: This switch is used to enable/disable the router's wireless function.

SIM Card: Insert the SIM card into the slot.

TL-MR6400
Figure 1-2 Rear Panel sketch
-5-
300Mbps Wireless N 4G LTE Router