TP-Link TL-MR6400 Quick Installation Manual

Quick Installation Guide

300Mbps Wireless N 4G LTE Router
TL-MR6400

Connect the Hardware

Verify the Hardware
Connection
Enjoy the Internet
Verify the hardware connection by checking the
following LEDs' status. If the Internet LED is
on, your router is connected to the Internet
successfully.
Power Internet Wireless
On On On
Wired: Connect your computers to the router's LAN ports via Ethernet cables.
Wireless: Connect using the SSID (wireless network name) and Wireless Password
printed on the product label at the bottom of the router.
3 2
Turn on the router. Insert the SIM card into the slot until
For better Internet connection, make sure 3 to 4 bars of the
Signal Strength LED are lit. Otherwise, relocate the router
to a location that receives a strong mobile Internet signal, such as
near a window.
Wireless TL-MR6400
1
Install the 4G LTE antennas and
position them upwards.
you hear a click.
Note: Micro or Nano-SIM card must be converted using a
standard SIM card adapter provided by TP-LINK.
Wired