System Routing Table - TP-Link TL-MR6400 User Manual

 Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
 Gateway - This is the IP Address of the gateway device that allows for contact between
the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button
to view the information in the next screen.

4.15.2 System Routing Table

Choose menu "Advanced Routing → System Routing Table", you can configure the system
routing table in the next screen (shown in Figure 4-67). System routing table views all of the
valid route entries in use.
Destination Network - The Destination Network is the address of the network or host to

which the static route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network

portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the

router and the network or host.
Interface - This interface tells you whether the Destination IP Address is on the LAN &

WLAN (internal wired and wireless networks), the WAN (Internet).
TL-MR6400
Figure 4-67 System Routing Table
-69-
300Mbps Wireless N 4G LTE Router