TP-Link TL-MR6500v Quick Installation Manual

Quick Installation Guide
Wireless 4G LTE Telephony Router
Images may differ from actual products.
©2020 TP-Link 7106508873 REV1.0.0
2. Verify the Hardware Connection
Check the following LEDs' status. If the Internet LED
connected to the internet successfully.
Power Internet Wi-Fi
On On On
Note: If the Internet LED does not turn on, please refer to Need Help? > Q2 on the back page.
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger
mobile network signal, such as near a window.
1. Connect the Hardware
SIM Card Requirements
Micro
Micro SIM card
• Size: Use a micro SIM card, or manually convert a nano SIM card using the SIM card adapter and sticker.
Note: To prevent damage, do not insert a nano SIM card directly, and do not insert an empty SIM card adapter or
any other object into the slot.
• Direction: With the gold contacts facing down, gently slide the SIM card into the slot.
d. Connect your landline
3. Enjoy the Internet
is on, your router is Wired
Connect your computer to the router's LAN port via an Ethernet cable.
Wireless
a. Find the SSID (network name) and wireless password printed on the label at the
bottom of the router.
Note: For a dual-band router, you can find two default SSIDs. Choose one to join the Wi-Fi.
b.
Click the network icon of your computer or go to Wi-Fi settings of your smart
device, and then select the SSID to join the network.
Standard
+ +
Nano Nano
Empty SIM Standard
Nano SIM card + Provided SIM card adapter + Provided sticker Nano SIM card
card adapter SIM card
c. Connect the power
phone to the RJ11 adapter and turn
port (PHONE port). on the router.
a. Install the antennas
Router
b. Insert the Micro SIM
4. Customize the 4G LTE Router
1. Make sure your computer is connected to the router (wired or wireless).
2. Launch a web browser and type in http://tplinkmodem.net or
http://192.168.1.1. Create a new password for future logins.
Note: If the login page does not appear, please refer to Q1 of Need Help? in this guide.
http://tplinkmodem.net
New Password
Low Middle High
Confirm Password
Let's Get Started
3. Follow the step-by-step instructions of the Quick Setup to complete the initial
configuration.
Note: The router can also be used (or configured) in Wireless Router Mode for
DSL/Cable connections. For more advanced configurations, please refer to the user
guide on TP-Link official website at www.tp-link.com.
and position them
upwards.
card into the slot
until you hear a click.