Wireless Advanced - TP-Link TL-MR6400 User Manual

4.8.4

Wireless Advanced

Choose menu "Wireless → Wireless Advanced", and then you can configure the advanced
settings of your wireless network.
Transmit Power - Here you can specify the transmit power of this device. You can

select High, Middle or Low which you would like. High is the default setting and is
recommended.
Beacon Interval - The beacons are the packets sent by this device to synchronize a

wireless network. Beacon Interval value determines the time interval of the beacons.
You can specify a value between 40-1000 milliseconds. The default value is 100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the

packet is larger than the specified RTS Threshold size, this device will send RTS
frames to a particular receiving station and negotiate the sending of a data frame. The
default value is 2346.
Fragmentation Threshold - This value is the maximum size determining whether

packets will be fragmented. Setting the Fragmentation Threshold too low may result in
poor network performance since excessive packets. 2346 is the default setting and is
recommended. (This value for the mode of 11N series can not be changed)
TL-MR6400
Figure 4-25 Wireless Advanced
-39-
300Mbps Wireless N 4G LTE Router