TP-Link TL-MR6400 User Manual page 47

Wireless Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
•
the length should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
WPA /WPA2 - Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security on the pull-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2 - Enterprise radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-21.
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port that radius service used.
•
Radius Password - Enter the password for the Radius Server.
•
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
TL-MR6400 300Mbps Wireless N 4G LTE Router
Figure 4-20
Figure 4-21
-35-