Local Management - TP-Link TL-MR6400 User Manual

gateway to support address and port translation for certain application layer "control/data"
protocols such as FTP, TFTP, H323 etc.
FTP ALG - To allow FTP clients and servers to transfer data across NAT, click Enable.

TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click

Enable.
H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, click

Enable.
RTSP ALG - To allow some media player clients to communicate with some streaming

media servers across NAT, click Enable.
SIP ALG - To allow some multimedia clients to communicate across NAT, click

Enable.
Click the Save button to save your settings.

4.12.2 Local Management

Choose menu "Security → Local Management", you can configure the management rule in
the screen as shown in Figure 4-44. The management feature allows you to deny LAN
computers from accessing the router.
By default, the radio button All the PCs on the LAN are allowed to access the Router's
Web-Based Utility is selected. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the router's Web-Based Utility locally, from inside the network, click the radio
button Only the PCs listed can browse the built-in web pages to perform Administrator
tasks, and then enter each MAC Address in a separate field. The format for the MAC Address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the MAC address listed
can use the password to browse the built-in web pages to perform Administrator tasks and all
the others will be blocked.
After click the Add button, your PC's MAC Address will be placed in the Control List above.
Click the Save button to save your settings.
TL-MR6400
Figure 4-44 Local Management
-53-
300Mbps Wireless N 4G LTE Router