TP-Link TL-MR6400 User Manual page 71

There are two methods to add a new rule.
Method One:
1. Click Setup Wizard button and the next screen will appear as shown in Figure 4-51.
Host Description - In this field, create a unique description for the host (e.g. Host_1).

Mode - Here are two options, IP Address and MAC Address. You can select either of

them from the drop-down list.
If the IP Address is selected, you can see the following item:
LAN IP Address - Enter the IP address or address range of the host in dotted-decimal

format (e.g. 192.168.1.23).
If the MAC Address is selected, you can see the following item:
MAC Address - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format

(e.g. 00-11-22-33-44-AA).
2. Click Next when finishing creating the host entry, and the next screen will appear as shown
in Figure 4-52.
Figure 4-52 Quick Setup – Create an Access Target Entry
Target Description - In this field, create a description for the target. Note that this

description should be unique (e.g. Target_1).
TL-MR6400
Figure 4-51 Quick Setup – Create a Host Entry
300Mbps Wireless N 4G LTE Router
-59-