TP-Link TL-MR6400 User Manual page 30

10. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-19.
Wireless Radio - Enable or disable the wireless function.

Wireless Network Name - Enter a string of up to 32 characters. The same name of

SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption. It
is recommended strongly that you choose one of following options to enable security.
WPA-PSK/WPA2-PSK – Select WPA-PSK/WPA2-PSK based on pre-shared

passphrase.
Wireless Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z,
the length should be between 8 and 63 characters.
TL-MR6400
Figure 3-19 Quick Setup – Wireless
-18-
300Mbps Wireless N 4G LTE Router