Wireless Statistics - TP-Link TL-MR6400 User Manual

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your Guest Network.
Wireless Security - You can configure the security of Guest Network here.

Access Time - During the time the wireless stations could accessing the


4.9.2 Wireless Statistics

Choose menu "Guest Network → Wireless Statistics", and then you can see the MAC
Address, Current Status, Received Packets and Sent Packets for each connected wireless
station.
MAC Address - The connected wireless station's MAC address.

Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP /
AP-DOWN / Disconnected.
Received Packets - Packets received by the station.

Sent Packets - Packets sent by the station.

Configure - The button is used for loading the item to the Wireless MAC Filtering list.

Deny: if the Wireless MAC Filtering function enable, deny the station to access.
Allow: if the Wireless MAC Filtering function enable, allow the station to access.
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return to the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
TL-MR6400
Figure 4-29 Guest Network – Wireless Statistics
300Mbps Wireless N 4G LTE Router
-42-
router .