Advertisement
4
STEP
•
Assemble the upper beam(4), onto the front support(31), weight guidance rod by
Assemble the upper beam(4), onto the front support(31), weight guidance rod by
caps(35), then sequentially with 2 bolts(104), 4 flat washers(101), 1 reinforcing board, 2 nylon
caps(35), then sequentially with 2 bolts(104), 4 flat
nut(102); 2 bolts(115), 2 flat washers(101),
bolts(115), 2 flat washers(101), and then fix the rubber buffer onto the front vertical
support(3).
•
Fix the support of single pulley support(69) to the front vertical support by using 1 bolt(114),2 flat
Fix the support of single pulley support(69) to the front vertical support by using 1
Fix the support of single pulley support(69) to the front vertical support by using 1
washers(101) and 1 nylon nut(102).
washers(101) and 1 nylon nut(102).
washers(101), 1 reinforcing board, 2 nylon
and then fix the rubber buffer onto the front vertical
using 3 square plastic
Advertisement
