Advertisement
12
STEP
assembly the cable (leg curler) and pulley at the same time:
assembly the cable (leg curler) and pulley at the same time:
•
the cable going way as drawing . From one end of cable to the other, there will be 5 raised pulley
the cable going way as drawing . From one end of cable to the other, there will be 5 raised pulley (56)
the cable going way as drawing . From one end of cable to the other, there will be 5 raised pulley
among these 2 already assembled in step 10 & 11 when fix the cable (50) &(51) and 1 flat pulley
•
how to fix the flat pulley (57) as drawing A: fix it into the tube of leg curler by 1 bolt (103), 1 bushing
how to fix the flat pulley (57) as drawing A:
(65) and 1 nut (102).
•
how to fix the raised pulley(56) as drawing B: Fix the pulley with 1 bolt (119), 2 flat washer (101),
how to fix the raised pulley(56) as dr
plastic ring (42) , cable guidance (41) and nut (102).
plastic ring (42) , cable guidance (41) and nut
•
how to fix the raised pulley (56) as drawing C: Assembly it using 1 bolt (112), flat washer (101), plastic
how to fix the raised pulley (56) as drawing C:
ring (42) and cable guidance (41).
ring (42) and cable guidance
already assembled in step 10 & 11 when fix the cable (50) &(51) and 1 flat pulley (57).
already assembled in step 10 & 11 when fix the cable (50) &(51) and 1 flat pulley
fix it into the tube of leg curler by 1 bolt (103), 1 bushing
Fix the pulley with 1 bolt (119), 2 flat washer (101),
Assembly it using 1 bolt (112), flat washer (101), plastic
Advertisement
