Advertisement
3
STEP
•
Fix the front vertical support(3), base frame(1) and hooking plate(21) by using 2
Fix the front vertical support(3), base frame(1) and hooking plate(21)
washers(101),and 2 bolts(104).
washers(101),and 2 bolts(104).
•
Assemble the cross plate (27), 2 round buffers(39) from the bottom , then assemble 9 lower weight
Assemble the cross plate (27), 2 round buffers(39) from the bottom , then assemble
Assemble the cross plate (27), 2 round buffers(39) from the bottom , then assemble
plates(47) and 1 upper weight plate(46) through the weight guidance
plates(47) and 1 upper weight plate(46) through the weight guidance rod(16). Insert the weig
bar(18) through the hole of weights and fix the weight sleeve(55) down from the upper weight plate(46)
bar(18) through the hole of weights and fix the
by using the weight pin(53) and the weight washer(54). Finally put the cross plate(27) and 2 fixing
by using the weight pin(53)
sleeves(40) on the upper bottom of the w
on the upper bottom of the weight guidance rod(16). Please noted: the weight pin (53)
through the weight sleeve (55) at the first top hole of weight selecting bar（18）
through the weight sleeve (55) at the first top hole
pin (53), weight pin (53) and flat washer (54) all needed otherwise you can't use the upper
pin (53), weight pin (53) and flat washer (54) all needed
separately.
weight sleeve(55) down from the upper weight plate(46)
and the weight washer(54). Finally put the cross plate(27) and 2 fixing
rod(16). Insert the weight selecting
Please noted: the weight pin (53)
）. The parts of weight
otherwise you can't use the upper weight plates
nylon nuts(102), 4 flat
Advertisement
