Advertisement
10
STEP
Connection of cable (butterfly arm)(51) and assembly the pulley:
Connection of cable (butterfly arm)(51) and assembly the pulley: (1) hooking one end of the cable to the right
e end of the cable to the right
butterfly arm (7) and slide the other end of
butterfly arm (7) and slide the other end of the cable along the pulley, at the same time you
the cable along the pulley, at the same time you need to fix the 1
raised pulley (56) into the 1 single pulley support (20) by 2 plastic ring
raised pulley (56) into the 1 single pulley support (20) by 2 plastic ring (42), 2 cable guidance (41), 2 flat washer
(42), 2 cable guidance (41), 2 flat washer
(101), 1 bolt (112) and 1 nut (102). Then fix
(101), 1 bolt (112) and 1 nut (102). Then fix the single pulley supports onto right butterfly arm by 1 bolt (120), 1
ts onto right butterfly arm by 1 bolt (120), 1
flat washer (101),1 flat washer (105) and 1 nut (110).
flat washer (105) and 1 nut (110).
(2) after going downward the cable through the double pulley support(19), also, at the
(2) after going downward the cable through the double pulley support(19), also, at the same time you need to fix
same time you need to fix
the raised pulley(56) into the pulley
the raised pulley(56) into the pulley support by using by 2 plastic ring (42), 2 cable guidance (41), 2 flat washer
plastic ring (42), 2 cable guidance (41), 2 flat washer
(101), 1 bolt (112) and 1 nut (102).
Advertisement
