Perkins M300TI Installation Manual page 23

TPD1317e
Stainless steel belows
Note: When fitted, the bellows units should be in an unstrained condition so that the full bellows movement is
available to absorb expansion and engine movement.
Bracket with link to allow for movement due to
exhaust systems should be suspended from the
deck head using similar brackets - rigid brackets
90 Elbow
O
Figure 9 - Dry Exhaust System Features - M92B.
expansion in the exhaust system (horizontal
should not be used).
Insulating lagging
Rigid bracket to support the weight of the
vertical exhaust system
Flanges shown without
bolts for clarity
Heat blanket
Heat blanket
Chapter 3
Connection
Page 19