Perkins M300TI Installation Manual page 19

TPD1317e Chapter 3
Bracket with link to allow for movement due to
expansion in the exhaust system (horizontal
exhaust systems should be suspended from
the deck head using similar brackets - rigid
brackets should not be used).
Insulating lagging
Rigid bracket to support the weight of the
vertical exhaust system
Heat blanket
Flanges shown without Twin stainless steel belows fitted to
bolts for clarity avoid torsional load on bellows unit
90 Elbow
O
Heat blanket
Figure 5 - Dry Exhaust System Features - M185C, M215C, M225Ti, M265Ti & M300Ti
Note: When fitted, the bellows units should be in an unstrained condition so that the full bellows movement is
available to absorb expansion and engine movement.
Page 15