Lexmark E460dn User Manual page 91

Menu item
+APSKNG @@NAOO
UAA
LAA
'K> 1EIAKQP
0-225 seconds
=JJAN -=CA
On
Off
1 -&- IAJQ
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports ΠNetwork Menu ΠNetwork Setup ΠTCP/IP
Menu item
?PER=PA
On
Off
3EAS %KOPJ=IA
&- @@NAOO
+API=OG
$=PAS=U
"J=>HA !% -
On
Off
"J=>HA / /-
On
Off
"J=>HA ,,1-
On
Off
Description
Lets you view the network addresses
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, the setting is saved as 10.
•
Allows the printer to print a banner page
Note: Off is the factory default setting.
Description
Activates TCP/IP
Note: On is the factory default setting.
Lets you view the current TCP/IP hostname
Note: This can be changed only from the Embedded Web Server.
Lets you view or change the current TCP/IP Address information
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.
Lets you view or change the current TCP/IP Netmask information
Lets you view or change the current TCP/IP Gateway information
Specifies the DHCP address and parameter assignment setting
Note: On is the factory default setting.
Specifies the RARP address assignment setting
Note: On is the factory default setting.
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
2J@ANOP=J@EJC LNEJPAN IAJQO