Load envelopes with the flap side down and the stamp location in the position shown. The stamp and address
•
are shown to illustrate the proper orientation for loading envelopes.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings,
or self-stick adhesives. These envelopes may severely damage the printer.
Squeeze the tab located on the right width guide to adjust the guides to lightly touch the sides of the stack.
4
Slide the paper gently into the multipurpose feeder until it comes to a stop. Paper should lie flat in the
5
multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.
From the printer control panel, set the Paper Size and Paper Type.
6
)K=@EJC L=LAN =J@ OLA?E=HPU IA@E=