Lexmark E460dn User Manual page 112

Menu item
- ) "IQH=PEKJ 0APPEJCO
Pitch
0.08–100
- ) "IQH=PEKJ 0APPEJCO
Orientation
Portrait
Landscape
- ) "IQH=PEKJ 0APPEJCO
Lines per Page
1–255
- ) "IQH=PEKJ 0APPEJCO
A4 Width
198 mm
203 mm
- ) "IQH=PEKJ 0APPEJCO
Auto CR after LF
On
Off
- ) "IQH=PEKJ 0APPEJCO
Auto LF after CR
On
Off
Description
Specifies the font pitch for scalable monospaced fonts
Notes:
10 is the factory default setting.
•
Pitch refers to the number of fixed-space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01-cpi increments.
•
For nonscalable monospaced fonts, the pitch appears on the display but
•
cannot be changed.
Specifies the orientation of text and graphics on the page
Notes:
Portrait is the factory default setting.
•
Portrait prints text and graphics parallel to the short edge of the page.
•
Landscape prints text and graphics parallel to the long edge of the page.
•
Specifies the number of lines that print on each page
Notes:
60 is the US factory default setting. 64 is the international factory default
•
setting.
The printer sets the amount of space between each line based on the Lines
•
per Page, Paper Size, and Orientation settings. Select the desired Paper Size
and Orientation before setting Lines per Page.
Sets the printer to print on A4-size paper
Notes:
198 mm is the factory default setting.
•
The 203-mm setting sets the width of the page to allow the printing of
•
eighty 10-pitch characters.
Specifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Note: Off is the factory default setting.
Specifies whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command
Note: Off is the factory default setting.
2J@ANOP=J@EJC LNEJPAN IAJQO