Lexmark E460dn User Manual page 101

Menu item
KJBECQNA )KC
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7
0AP !=PA1EIA IAJQ
Menu item
3EAS !=PA1EIA
0AP !=PA1EIA
1EIA 7KJA
<list of time zones>
,>OANRA !01
On
Off
Description
Specifies whether and how the audit logs of print jobs are created:
Enable Audit determines if the printer records events in the secure audit log and
•
in the remote syslog.
Enable Remote Syslog determines if the printer sends logged events to a remote
•
server.
Remote Syslog Facility determines the facility value that the printer uses when
•
sending events to the remote syslog server.
"Severity of events to log" specifies how critical a logged event is. With this log
•
activated, the printer logs each event with a severity value equal to or less than
the setting value.
0 is Emergency
1 is Alert
2 is Critical
3 is Error
4 is Warning
5 is Notice
6 is Informational
7 is Debug
Notes:
Yes is the factory default setting for Enable Audit.
•
No is the factory default setting for Enable Remote Syslog. If Enable Audit is set
•
to No, then no records are sent to the remote syslog even if Enable Remote
Syslog is set to Yes.
4 - Security is the factory default setting for Remote Syslog Facility.
•
4 is the factory default setting for Severity of events to log.
•
Description
Lets you view the current date and time settings for the printer. The format for the
date and time is: YYYY-MM-DD HH:MM:
YYYY is the four-digit year
MM is a two-digit month
DD is a two-digit date
HH is a two-digit hour
MM is a two-digit minute
Lets you enter the date and time
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Lets you select the time zone
Note: GMT is the factory default setting.
Sets the printer to use the applicable Daylight Saving Time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting.
2J@ANOP=J@EJC LNEJPAN IAJQO