No security
–
If your wireless network does not use any type of security, you will not have any security information.
Note: Using an unsecured wireless network is not recommended.
If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:
Authentication type
•
Inner authentication type
•
802.1X username and password
•
Certificates
•
Note: For more information on configuring 802.1X security, see the Networking Guide on the Software and
Documentation CD.
&JOP=HHEJC PDA LNEJPAN KJ = SENAHAOO JAPSKNG 4EJ@KSO
Before you install the printer on a wireless network, make sure that:
Your wireless network is set up and working properly.
•
The computer you are using is connected to the same wireless network where you want to set up the printer.
•
Connect the power cable, and then turn the printer on.
1
Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen.
@@EPEKJ=H LNEJPAN OAPQL