Lexmark E460dn User Manual page 133

Part name
Extra High Yield Toner Cartridge
,N@ANEJC = LDKPK?KJ@Q?PKN GEP
The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a
photoconductor kit. You can also see the status of the photoconductor kit by printing a network setup page.
Part name
Photoconductor kit
,N@ANEJC = I=EJPAJ=J?A GEP
80 Routine maintenance needed appears on the display after 120,000 pages have printed to let you know
it is time to replace printer maintenance items. Order a maintenance kit when this message first appears. The
maintenance kit contains all the items necessary to replace the fuser and transfer roller.
Notes:
The maintenance kit may not be available in all geographies.
•
Using certain types of paper or specialty media may require more frequent replacement of the maintenance kit.
•
See the following table for the maintenance kit part number for your printer:
Part name
Maintenance kit
* Designed for use only in Japan
/ALH=?EJC OQLLHEAO
/ALH=?EJC PDA PKJAN ?=NPNE@CA
When 88 Cartridge low appears, or when you experience faded print, remove the toner cartridge. Firmly shake
it side-to-side and front-to-back several times to redistribute the toner, and then reinsert it and continue printing.
When shaking the cartridge no longer improves the print quality, replace the toner cartridge.
Note: You can check to see approximately how much toner is left in your cartridge by printing a menu settings page.
Lexmark Return Program Cartridge
E462U11L
Part number
40X5402 (100 V)*
40X5400 (115 V)
40X5401 (230 V)
*=EJP=EJEJC PDA LNEJPAN

Regular cartridge
E462U21G
Part number
E260X22G