Lexmark E460dn User Manual page 137

5 Insert the toner cartridge into the photoconductor kit by aligning the rollers on the toner cartridge with the tracks.
Push the toner cartridge until it clicks into place.
Install the unit into the printer by aligning the arrows on the guides of the unit with the arrows in the printer.
6
Push the unit as far as it will go.
After you replace the photoconductor kit, reset the photoconductor counter. To reset the counter, see the
7
instruction sheet that came with the new photoconductor kit.
Warning—Potential Damage: Resetting the photoconductor counter without replacing the photoconductor
may damage your printer and void your warranty.
Close the front door.
8
/A?U?HEJC )ATI=NG LNK@Q?PO
To return Lexmark products to Lexmark for recycling:
Visit our Web site at www.lexmark.com/recycle.
1
Find the product type you want to recycle, and then select your country or region from the list.
2
3 Follow the instructions on the computer screen.
*=EJP=EJEJC PDA LNEJPAN