Lexmark E460dn User Manual page 30

3 From the main installation dialog, click Install.
Follow the instructions on the screen.
4
#KN *=?EJPKOD QOANO
1 Close all open software applications.
Insert the Software and Documentation CD.
2
3 From the Finder desktop, double-click the printer CD icon that automatically appears.
Double-click the Install icon.
4
5 Follow the instructions on the screen.
2OEJC PDA 4KNH@ 4E@A 4A>
Go to the Lexmark Web site at www.lexmark.com.
1
2 From the Drivers & Downloads menu, click Driver Finder.
Select your printer, and then select your operating system.
3
4 Download the driver and install the printer software.
0APPEJC QL SENAHAOO LNEJPEJC
Follow these instructions if you plan to use the wireless printer model on a wireless network.
Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP) and
Wi-Fi Protected Access (WPA) are types of security used on a network.
&JBKNI=PEKJ UKQ SEHH JAA@ PK OAP QL PDA LNEJPAN KJ = SENAHAOO
JAPSKNG
Note: Do not connect the installation or network cables until prompted to do so by the setup software.
SSID—The SSID is also referred to as the network name.
•
Wireless Mode (or Network Mode)—The mode will be either infrastructure or ad hoc.
•
Channel (for ad hoc networks)—The channel defaults to auto for infrastructure networks.
•
Some ad hoc networks will also require the auto setting. Check with your system support person if you are not
sure which channel to select.
Security Method—There are three basic options for Security Method:
•
WEP key
–
If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently
in use on the network by selecting the Default WEP Transmit Key.
or
WPA or WPA2 passphrase
–
WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be
set for the same type on the router and on the printer or the printer will not be able to communicate on the
network.
@@EPEKJ=H LNEJPAN OAPQL