Lexmark E460dn User Manual page 118

!, +,1 1,2 % /A=@EJC BH=OD @=P= !, +,1 -,4"/ ,##
As a part of this message, a bar graphic appears on one line of the display, indicating the percentage of processing
time completed.
Wait for the message to clear. The message displays until all code is received and the processing is complete.
Warning—Potential Damage: If your printer is connected to a computer by a USB cable, do not touch the printer
control panel while this message appears on the display. Do not turn the printer off while this message appears.
"J=>HEJC *AJQO
Wait for the message to clear.
#HQODEJC >QBBAN
Wait for the message to clear.
#KNI=PPEJC #H=OD !, +,1 -,4"/ ,##
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.
%AT 1N=?A
The printer is in Hex Trace mode.
%AT 1N=?A /A=@U
The printer is in the Ready state, and Hex Trace is active. You can use Hex Trace to troubleshoot printer problems.
&JR=HE@ "JCEJA K@A
You need to download valid engine code for the printer.
Note: Engine code may be downloaded while this message appears on the display.
&JR=HE@ +APSKNG K@A
You need to download valid network printing code for the internal print server. The internal print server is a hardware
option installed inside the printer.
Note: Network code may be downloaded while this message appears on the display.
)K=@ I=JQ=H BAA@AN SEPD T
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
•
Cancel the current job.
•
2J@ANOP=J@EJC LNEJPAN IAOO=CAO