Sd Card Management; Access The Ip Camera; Access The Camera In Lan - Ebode IPV68P2P User Manual

7.4 SD Card Management

Please first of all note that the SD card is an optional feature and that IPV68P2P including
SD card has to be ordered separately as item number IPV68P2PSD. The record files of
the IPC can be stored in the SD Card. This camera supports SD Card and the max size of
SD card must be under 32G. You need open the IP Camera, then plug the SD card into
SD card slot inside the IP Camera. When you plug in the SD card during the camera work
process, please reboot the camera again, or else the SD Card may be cannot work well.
Note: When you re-install the camera, please ensure the tightness with the camera.

8. ACCESS THE IP CAMERA

This chapter explains how to access the camera through browser and RTSP player.

8.1 Access the Camera in LAN

This camera supports HTTP and HTTPS protocols, you can access the camera by 2 ways.
(1) http:// LAN IP + HTTP Port NO.
Double click the IP Camera Tool icon and it should find the camera's IP address
automatically after you plug in the network cable.
Double click the IP address of the camera; your default browser will open to the camera
login page.
(2) https:// LAN IP + HTTPS Port NO.
The default Https port NO. is 443. You can use the url to access the camera: https:// LAN
IP + HTTPS port. Go to Settings - Network - Port panel , you can see and change the
https and https port NO.
HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access
your camera, the data transferred on the Internet will be encrypted.
Since we cannot apply license for every LAN or DDNS URL, the webpage may pop up a
warning like the following picture, you just need to click 'Continue to this website (not
recommended). '
24-9-2015
Figure 8.1
Figure 8.2
9 ebode IPV68P2P