User Manual IPV38P2P Wi-Fi HD720P Pan & Tilt Indoor P2P IP Camera Before using this product, please read this document carefully and visit www.ebodeelectronics.eu for latest manual, Software and FAQ.
IP cameras with hassle-free, three steps set-up and installation, thanks to a unique QR code scanning method. The IPV38P2P Pan and Tilt indoor camera with 11 IR-LEDs and automatic IR-LED takes care for Night Vision Range up to 8 meters.
The IPCAM provides Smart Phone APP for Android and iPhone users, please search and install the application named “ebode” on Google Play for Android devices, or on APP Store for iOS devices, then you can view your camera anywhere, anytime on your smart mobile devices.
(1) http:// LAN IP + HTTP Port NO. The default HTTP port no is 88. Double click the IP Camera Tool icon to run, and it should find the camera’s IP address automatically after you plug in the network cable. 31-7-2014 ebode IPV38P2P...
How to Obtain the WAN IP address from a public website To obtain your WAN IP address, enter http://www.whatismyip.com in your browser. The webpage at this address will show you the current WAN IP. 31-7-2014 ebode IPV38P2P...
Page 9
All cameras have the default HTTP port of 88. For example, if the LAN IP link of the camera is http://192.168.1.110:88, this means that the camera’s HTTP port is 88. You can change port 88 to another port if you’d like such as 2000 or 8090, which will not be 31-7-2014 ebode IPV38P2P...
Page 10
IP address, and click on ”Network Configuration”, this brings up the network configuration box. Select which camera you’d like to change the port for and right click Figure 4.4 Modify the Http Port. Enter user- name and password, click OK. Figure 4.5 31-7-2014 ebode IPV38P2P...
Page 11
Applications & Gaming menu. We would then click on the “Single Port Forwarding” sub-menu. Step 2: Create a new column using the LAN IP address & HTTP Port of the camera within the router as shown below, then push OK or Submit to save your settings: 31-7-2014 ebode IPV38P2P...
Page 12
Now you can use “http://Domain name + HTTP Port” to access the camera via Internet. Take hostname a33471.myipcamera.org and HTTP Port of 2000 for example, the URL link to access the camera via the Internet would be http:// a33471.myipcamera.org:2000. 31-7-2014 ebode IPV38P2P...
Here I can enter one of the following URLs in the VLC. 1) rtsp://admin:123@192.168.1.11:88/videoMain 2) rtsp:// @192.168.1.11:88/videoMain 3) rtsp://:123@192.168.1.11:88/videoMain 4) rtsp://admin@192.168.1.11:88/videoMain Open the VLC, go to Media Open Network Stream option, then enter the URL into VLC. 31-7-2014 ebode IPV38P2P...
Page 15
Quick Installation Guide about How to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 31-7-2014 ebode IPV38P2P...
NOTE: When the network bandwidth is badly you should better select Sub Stream and the video will be more fluency. 3. Select the language You can select the language you need via click on the language drop-down list to switch. 31-7-2014 ebode IPV38P2P...
After logging in for the first time, you will be directed to the“Setup Wizard”automatically. Here you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration. Figure 5.3 Camera Name: You could give a name for your IP camera. 31-7-2014 ebode IPV38P2P...
Page 18
Figure 5.4 System Time: Select the time zone you need to set the date, time, format, etc. Figure 5.5 Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password. Figure 5.6 31-7-2014 ebode IPV38P2P...
IP: Set the IP address of the camera. You could choose to obtain an IP automatically (DHCP) or set the IP address manually according to your needs. Figure 5.7 NOTE: It takes about 1 minute to connect the camera to your router. 5.4 Surveillance Window Figure 5.8 31-7-2014 ebode IPV38P2P...
Page 20
2) 60HZ ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor------Outdoor surveillance Stream The default stream supports multiple modes, For example: 0/720P/30fps/2M meanings: Stream type no. / Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. ) 31-7-2014 ebode IPV38P2P...
Page 21
After changing, please re-login the camera and you can see the modification. Zoom Control Zoom the camera’s lens. Zoom the camera’ lens. You can adjust the speed of the lens’ zoom at Settings--PTZ--Pan & Tilt Speed--Zoom speed. 31-7-2014 ebode IPV38P2P...
Page 22
3) Left control button. 4) Right control button. 5) Up-Left control button. 6) Up-Right control button. 7) Down-Left control button. 8) Down-Right control button. Click this button and go to center. 5. Cruise / Preset settings Cruise Settings 31-7-2014 ebode IPV38P2P...
Page 23
Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position. The preset position cannot contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel. 31-7-2014 ebode IPV38P2P...
Page 24
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The default device name is anonymous. Go to Settings ---Basic settings---Camera time panel and adjust the device time. Go to Settings ---Video---On Screen Display panel, you can add or no add OSD. 31-7-2014 ebode IPV38P2P...
Page 25
7) Full Screen: Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Figure 5.11 31-7-2014 ebode IPV38P2P...
Page 26
Or: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. Figure 5.12 When you select the Full Screen, then click right mouse, there is a Screen PTZ button. Figure 5.13 31-7-2014 ebode IPV38P2P...
Web version: Display the web UI version of your camera Plug-in version: Display the plug-in version of your camera 6.1.2 Device Status On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so on. 31-7-2014 ebode IPV38P2P...
Page 28
The log record shows who and which IP address accessed or logout the camera and when. Click the page number and go to the corresponding page to see more logs. Fill in one page number, click Go button and go to the corresponding page. Figure 6.4 31-7-2014 ebode IPV38P2P...
Manually: The administrator can enter the date and time manually. Note select the date and time format. Use DST: Select use DST, then select daylight saving time from the drop-down menu. Click Save button and submit your settings. 31-7-2014 ebode IPV38P2P...
Page 30
Figure 6.8 How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. 31-7-2014 ebode IPV38P2P...
Page 31
Figure 6.9 Figure 6.10 Delete: Select the account you want to delete, then click Delete button to take effect. NOTE: The default admin account cannot be deleted, but you can add other administrator users. 31-7-2014 ebode IPV38P2P...
Page 32
3 Click Add to take effect 2 Enter the User name and password of the 2nd camera Figure 6.11 Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. 31-7-2014 ebode IPV38P2P...
Page 33
Figure 6.12 Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Figure 6.13 31-7-2014 ebode IPV38P2P...
Page 34
(Read How to configure DDNS settings in chapter 6.3.3) Login to the first camera using a DDNS domain name and port. Use DDNS domain name and port to login. Make sure each camera you need add could login with DDNS name and port. Figure 6.15 31-7-2014 ebode IPV38P2P...
Page 35
NOTE: The MJ series have the same HTTP Port no. and Media Port no. 4) Enter the 2nd camera’s user name and password 5) Click Add button and to take effect NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP. 31-7-2014 ebode IPV38P2P...
Page 36
Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet. Figure 6.18 31-7-2014 ebode IPV38P2P...
PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows: Control Panel Network Connections Local Area Connections Choose Support Details. Click here Figure 6.20 31-7-2014 ebode IPV38P2P...
Page 38
It should also display your router in the list. Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than Figure 6.22 31-7-2014 ebode IPV38P2P...
Page 39
The IP Camera Tool will search the camera’s LAN IP. Make sure the PC and the camera share the same subnet. NOTE: The security mode of router cannot be WEP, or else the WPS settings may be failed. 31-7-2014 ebode IPV38P2P...
Page 40
Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service. 31-7-2014 ebode IPV38P2P...
Page 41
3322.com. Here take www.no-ip.com for example: ① Step 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register. Figure 6.26 Click here to register Figure 6.27 31-7-2014 ebode IPV38P2P...
Page 42
ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. Figure 6.28 Figure 6.29 Please create the domain name step by step according to instructions on www.no-ip.com 31-7-2014 ebode IPV38P2P...
Page 43
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed as below. Assign a Fill the Media Port no. of the name as you camera on the column of like here External Port and Internal Port Figure 6.30 31-7-2014 ebode IPV38P2P...
Page 44
HTTP port : By default, the HTTP and Media port is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they cannot be conflict with other existing ports like 25, 21. Figure 6.33 31-7-2014 ebode IPV38P2P...
Page 45
Figure 6.35 and 6.36. Select which camera you’d like to change the port for, and right click Figure 6.34 Modify the Http Port. Enter the Username and password, click Figure 6.35 31-7-2014 ebode IPV38P2P...
Page 46
User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. rtsp://admin:123@192.168.1.11:88/videoMain rtsp:// @192.168.1.11:88/videoMain rtsp://:123@192.168.1.11:88/videoMain rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to Media. Open Network Stream option and enter URL into VLC. 31-7-2014 ebode IPV38P2P...
Page 48
Quick Installation Guide about How to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 31-7-2014 ebode IPV38P2P...
4) Receiver: Mailbox for receiver need not support SMTP, you can set 4 receivers 5) Save: Click Save to take effect 6) Test: Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. 31-7-2014 ebode IPV38P2P...
Page 50
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server 8) The server does not support the authentication mode used by the device 6.3.8 FTP Settings If you want to upload record files and images to your FTP server,you can set FTP Settings. 31-7-2014 ebode IPV38P2P...
Page 51
Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username/password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured. 31-7-2014 ebode IPV38P2P...
P2P function of the IP Camera at “Settings Network P2P”. Figure 6.45 Search and install the application named “ebode” on Google Play for Android devices, or on APP Store for iOS devices. If you want to know more details of the iOS APP or Android APP, see the iOS App User Manual or Android APP User Manual.
Page 53
Figure 6.48 Allow On Screen Display Mask: There are two options: Yes or NO. Select Yes, then click “Set Privacy Zone” and draw a privacy area on the video, the privacy area will be black on the video. 31-7-2014 ebode IPV38P2P...
Page 54
The mask area Figure 6.49 Click OK button and return to the page, click Save to take effect. Back to the surveillance window, you can see the mask area as the following picture: Figure 6.50 31-7-2014 ebode IPV38P2P...
Page 55
On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the Schedule on the Live Video window, at these schedule time, the IR LED lights will be turned off. 31-7-2014 ebode IPV38P2P...
Select one motion sensitivity. Step 3) Trigger interval: The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time. Step 4) Select the alarm indicator 31-7-2014 ebode IPV38P2P...
Page 57
5) Set detect area Click set detect area and it pop up a window, then you can draw the detection area. Click OK button after settings. When something moving in the detection area, the camera will alarm. 31-7-2014 ebode IPV38P2P...
Page 58
Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. 31-7-2014 ebode IPV38P2P...
6.6 Record This section will allow you to change the record files storage path and the record time. 6.6.1 Storage Location On this page you can change the alarm and manually recording storage path. Figure 6.59 31-7-2014 ebode IPV38P2P...
Page 60
Figure 6.61 6.6.4 Scheduled Recording On the page you can configure the schedule record. When the parameter Recording Location is set SD Card on the Storage Location page, you can configure parameters as shown in follow figure. 31-7-2014 ebode IPV38P2P...
Page 61
When the parameter Recording Location is set FTP on the Storage Location page, you can configure parameters as shown in follow figure. Figure 6.63 Click Save button to take effect. 6.6.5 SD Card Management This camera supports SD Card and the max size of SD card must be under 32G. 31-7-2014 ebode IPV38P2P...
6.7.1 Pan/Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type and click save button . Figure 6.65 NOTE: This camera does not yet support zoom speed! 31-7-2014 ebode IPV38P2P...
Page 63
Cruise time: Select Cruise time from Cruise Mode drop-down, then you can set the Cruise time of the camera. Cruise Loops:Select Cruise Loops from Cruise Mode drop-down, you can set the Cruise Loops of the camera. Click Save to take effect. Figure 6.67 31-7-2014 ebode IPV38P2P...
Page 64
For example: I have added three preset points to the “track 1”, that means : When I select the “track 1” on the surveillance window, the camera moves as the following track: upright then Right Most last down left. You can add preset on the left of the surveillance window. 31-7-2014 ebode IPV38P2P...
Page 65
Add the preset. The cruise tracks have added to the “track 1” . Figure 6.69 After add the cruise track, back to the surveillance window, click Cruise, here you can see all cruise tracks you have added. 31-7-2014 ebode IPV38P2P...
Page 66
Attention: Considering the life time and thermal issue of the motor, it’s not recommend to do long-time cruise. 6.7.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots. It supports three modes: Disable Start-Up, Go To Home Position and Go To Preset Position. 31-7-2014 ebode IPV38P2P...
IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect. 31-7-2014 ebode IPV38P2P...
Upgrade Firmware by IP Camera Tool Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. 31-7-2014 ebode IPV38P2P...
Page 69
5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 31-7-2014 ebode IPV38P2P...
Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time & date manually. 31-7-2014 ebode IPV38P2P...
If abnormal, check the network connections. 8.1.1 How to install the plug-in for Safari Download the plug-in when you login your camera at the first time. Figure 8.1 31-7-2014 ebode IPV38P2P...
Page 72
Double click the plug-in to install it. Figure 8.2 Continue to finish the installation, and then it will be successful. Figure 8.3 Please check if the plug-in was successfully installed or not. Figure 8.4 Restart Safari to enable the plug-in. 31-7-2014 ebode IPV38P2P...
Page 73
Drag the download file to Firefox web page and it will prompt you to Install it. Click Install Now Figure 8.6 Reboot the Firefox after the plugin installation is successfully completely, then re-login the camera again, you can see the surveillance window. 31-7-2014 ebode IPV38P2P...
Page 74
For the first time login the camera, it will prompt you to download the ActiveX. Figure 8.7 Download the plugin and drag it to the Extensions page of Google Chrome. Go to Extensions page Figure 8.8 Click Add button to install the Plugins. 31-7-2014 ebode IPV38P2P...
Page 75
Plug-ins. Three options of front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows: Enable: Download unsigned ActiveX controls Enable: Initialize and script ActiveX controls not marked as safe Enable: Run ActiveX controls and plug-ins 31-7-2014 ebode IPV38P2P...
Page 76
1. ActiveX controller is not installed correctly 2. The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again. 3. Port forwarding is not successful Check these settings and make sure they are correct. 31-7-2014 ebode IPV38P2P...
720P (1280 x 720), VGA (640 x 480), VGA (640 x Resolution 360), QVGA (320 x 240), QVGA (320 x 180) Video Stream dual stream The hue, brightness, contrast, saturation, Image adjustment sharpness are adjustable Flip image flip and mirror 31-7-2014 ebode IPV38P2P...
Page 78
Operating Humidity 20% ~ 85% non-condensing ment Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certifi cation CE, FCC, RoHS Power adapter should be used between 0℃-40℃, and 5%-90% relative humidity. 31-7-2014 ebode IPV38P2P...
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Questions? Please visit our website www.ebodeelectronics.eu for FAQ and our contact details. 31-7-2014 ebode IPV38P2P...
Page 80
DECLARATION OF CONFORMITY Hereby, ebode electronics, declares that this ebode IPV38P2P is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic...
Page 81
Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okreslonymi Dyrektywą UE: 1999/5/EC 31-7-2014 ebode IPV38P2P...
Page 82
& play. The products provide you with comfort in your home, help you to avoid wires, and make sure you can stream your personal audio and video to where ever you want to look or listen to it. For more ebode products and information, please visit www.ebodeelectronics.eu.
Page 83
& play. The products provide you with comfort in your home, help you to avoid wires, and make sure you can stream your personal audio and video to where ever you want to look or listen to it. For more ebode products and information, please visit www.ebodeelectronics.eu.