Default Parameters - Ebode IPV68P2P User Manual

Wi-fi hd960p 1.3mp ptz dome p2p ip camera
Hide thumbs Also See for IPV68P2P:
Table of Contents

Advertisement

If you allow the ActiveX running, but still could not see living video. Please change
another port number to try. Don't use port 8000.
NOTE: Make sure that your firewall or anti-virus software does not block the camera or
ActiveX. If you could not see video, please shut down firewall or anti-virus software to
try again.
12.1.7 Can't access IP camera in internet
There are some reasons:
1、ActiveX controller is not installed correctly
2、The port which camera used is blocked by Firewall or Anti-virus software. Please
change another port number and try again.
3、Port forwarding is not successful
Check these settings and make sure they are correct.
12.1.8 UPnP always failed
UPnP only contains port forwarding in our recent software. Sometimes, it may be failed
to do port forwarding automatically because of firewall or anti-virus software. It also has
much relation with router's security settings. So we recommend you do port forwarding
manually. You can view your camera in internet successfully after you do port forwarding
manually in your router (Figure 10.29).
12.1.9 Camera cannot connect wireless
If your camera could not connect wireless after you set wireless settings and plug out
the cable. Please check whether your settings are correct or not.
Normally, camera can't connect wireless mainly because of wrong settings.
Make sure broadcast your SSID; use the same encryption for router and camera.
12.1.10 Can't see other cameras listed
Can't see other cameras listed in multi-device when using remote access.
If you want to view all the cameras via the WAN, verify that each camera added in the
multi-device settings can be accessed by using the DDNS name and port number. Use
the DDNS domain name not the camera's LAN IP. (For more details see: How to add
cameras in WAN)

12.2 Default Parameters

Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded domain name
Username and password
24-9-2015
Figure 12.6
Figure 12.7
74
ebode IPV68P2P

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPV68P2P and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents