1. Manuals
  2. Brands
  3. Ebode Manuals
  4. IP Camera
  5. IPV58P2P
  6. User manual

Ebode IPV58P2P User Manual

Wi-fi hd720p waterproof outdoor p2p ip camera
Hide thumbs Also See for IPV58P2P:
Table of Contents

Advertisement

Quick Links

Download this manual
www.ebodeelectronics.eu

User Manual

IPV58P2P
Wi-Fi HD720P Waterproof Outdoor P2P IP Camera
Before using this product, please read this document carefully and visit
www.ebodeelectronics.eu
for latest manual, Software and FAQ.

Advertisement

Table of Contents
loading

Related Manuals for Ebode IPV58P2P

Summary of Contents for Ebode IPV58P2P

  • Page 1: User Manual

    User Manual IPV58P2P Wi-Fi HD720P Waterproof Outdoor P2P IP Camera Before using this product, please read this document carefully and visit www.ebodeelectronics.eu for latest manual, Software and FAQ.

  • Page 2: Technical Specification

    Motion Detection Alarm via E-Mail and FTP  Free ebode DDNS Service embedded  Compatible with free ebode Central Management Software  Compatible with free ebode iOS and Android APP  Supports IEEE 802.11n Wireless Connection  Supports WEP, WPA and WPA2 Encryption ...

  • Page 3: Table Of Contents

    Advanced Camera Settings……………………………………………………………………. 23 Status……………………………………………………………………………………….. 23 Basic Settings…………………………………………………………………………… 25 Network……………………………………………………………………………………. 34 Video…………………………………………………………………………………………. 49 Alarm………………………………………………………………………………………… 53 Record………………………………………………………………………………………. 56 PTZ……………………………………………………………………………………………. 57 Firewall……………………………………………………………………………………… 58 System……………………………………………………………………………………… 59 Appendix…………………………………………………………………………………………………. 61 Frequently Asked Questions……………………………………………………. 61 Default Parameters………………………………………………………………….. 69 Specifications……………………………………………………………………………. 69 CE & FCC…………………………………………………………………………………… 71 31-7-2014 ebode IPV58P2P...

  • Page 4: Conformity Of Use

    Congratulations on purchasing the ebode IPV58P2P. Please check our website www.ebodeelectronics.eu for the latest version of this manual. This manual will help you operate the Wi-Fi HD720P Indoor P2P IP Camera. The ebode IPV58P2P camera offers the latest generation of IP cameras with hassle-free, three steps set-up and installation, thanks to a unique QR code scanning method.

  • Page 5: Overview

    The IPCAM provides Smart Phone APP for Android and iPhone users, please search and install the application named “ebode” on Google Play for Android devices, or on APP Store for iOS devices, then you can view your camera anywhere, anytime on your smart mobile devices.

  • Page 6: Physical Description

    3.3 Physical Description Front Panel Figure 3.1 1. Infrared LED: Wireless Antenna. 2. LENS: CMOS sensor with fixed focus lens. 3. Induction IC. 4. Infrared LED: 12 IR LEDs Interface Figure 3.2 31-7-2014 ebode IPV58P2P...
  • Page 7 If your camera does not have labels as shown in Figure 3.3 and 3.4, it may be a clone. Cloned cameras cannot use original firmware and are not eligible for warranty or technical services. Figure 3.3 31-7-2014 ebode IPV58P2P...

  • Page 8: Access The Ip Camera

    Go to Settings - Network - Port panel , you can see and change the https port no. Figure 4.2 HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access your camera, the data transferred on the Internet will be encrypted. 31-7-2014 ebode IPV58P2P...

  • Page 9: Access The Camera In Wan

    If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service settings to view it remotely. Step 1: Enter the username and password of the Administrator (default username is admin with a blank password), and click “OK” to apply changes. 31-7-2014 ebode IPV58P2P...
  • Page 10 IP address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure 2.8 and 2.9. Select which camera you’d like to change the port for and right click Figure 4.5 31-7-2014 ebode IPV58P2P...
  • Page 11 Applications & Gaming menu. We would then click on the “Single Port Forwarding” sub-menu. Step 2: Create a new column using the LAN IP address & HTTP Port of the camera within the router as shown below, then push OK or Submit to save your settings: 31-7-2014 ebode IPV58P2P...
  • Page 12 Now you can use “http://Domain name + HTTP Port” to access the camera via Internet. Take hostname cp4911.myipcamera.org and HTTP Port of 2000 for example, the URL link to access the camera via the Internet would be http:// test09.myipcamera.org:2000. 31-7-2014 ebode IPV58P2P...

  • Page 13: Using The Vlc Player

    Here I can enter one of the following URLs in the VLC. 1) rtsp://admin:123@192.168.1.11:88/videoMain 2) rtsp:// @192.168.1.11:88/videoMain 3) rtsp://:123@192.168.1.11:88/videoMain 4) rtsp://admin@192.168.1.11:88/videoMain Open the VLC, go to Media  Open Network Stream option, then enter the URL into VLC. 31-7-2014 ebode IPV58P2P...
  • Page 14 Figure 4.10 Figure 4.11 31-7-2014 ebode IPV58P2P...

  • Page 15: Ip Camera Connection To The Server

    VLC. 4.4 IP camera connection to the server Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF. 31-7-2014 ebode IPV58P2P...

  • Page 16: Surveillance Software Gui

    NOTE: When the network bandwidth is badly you’d better select Sub Stream and the video will be more fluency. 3. Select the language You can select the language you need via click on the language dropdown list to switch. 31-7-2014 ebode IPV58P2P...

  • Page 17: Modify The Username And Password

    When you log in for the first time, it will come to the operating of modify the username and password automatically. Figure 5.2 Enter the New Username, New password and Confirm the password. Click Modify button, you will see the login page again. 5.3 Surveillance Window Figure 5.3 31-7-2014 ebode IPV58P2P...
  • Page 18 2) Resolution The lowest resolution is QVGA. The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA. 31-7-2014 ebode IPV58P2P...
  • Page 19 You can reset the stream type on “Settings  Video  Video Settings” panel. Figure 5.5 Pan/Tilt Control (Not available for this camera) When via RS485 interface to connect an external PTZ device, you can use this feature. 31-7-2014 ebode IPV58P2P...
  • Page 20 Firstly: Select one track in the track drop-down list Select one of these Secondly: Click Start cruise button, the camera will cruise following the predefined path. Thirdly: Click stop button and finish cruising. 6. IR LED Lights 31-7-2014 ebode IPV58P2P...
  • Page 21 The default device name is anonymous. Go to Settings ---Basic settings---Camera time panel and adjust the device time. Go to Settings ---Video---On Screen Display panel, you can add or no add OSD. 9. Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button 31-7-2014 ebode IPV58P2P...
  • Page 22 Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom up/down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. 31-7-2014 ebode IPV58P2P...

  • Page 23: Advanced Camera Settings

    Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings. 6.1 Device Status Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 6.1.1 Device Information Figure 6.1 31-7-2014 ebode IPV58P2P...
  • Page 24 Figure 6.2 4.1.3 Session status Session status will display who and which IP is visiting the camera now. Figure 6.3 4.1.4 Log The log record shows who and which IP address accessed or logout the camera and when. 31-7-2014 ebode IPV58P2P...

  • Page 25: Basic Settings

    Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. Figure 6.5 6.2.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. 31-7-2014 ebode IPV58P2P...
  • Page 26 DST: Select the use DST, then select daylight saving time from the dropdown menu. Click Save button to submit your settings. 6.2.3 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default administrator user accounts are admin with a blank password. Figure 6.7 31-7-2014 ebode IPV58P2P...
  • Page 27 How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. Figure 6.9 31-7-2014 ebode IPV58P2P...
  • Page 28 NOTE: The default administrator account cannot be deleted, but you can add other administrator users. How to change the username ? Firstly, select the account which you want to change the username, then select “Change username”, enter the new password, lastly click modify to take effect. Figure 6.11 31-7-2014 ebode IPV58P2P...
  • Page 29 2 Enter the User name and password of the 2nd camera 3 Click Add to take effect Figure 6.12 Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. 31-7-2014 ebode IPV58P2P...
  • Page 30 Figure 6.13 Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Figure 6.14 31-7-2014 ebode IPV58P2P...
  • Page 31 (Read How to configure DDNS settings in chapter 6.3.3) Login to the first camera using a DDNS domain name and port. Use DDNS domain name and port to login. Make sure each camera you need add could login with DDNS name and port. Figure 6.16 31-7-2014 ebode IPV58P2P...
  • Page 32 3) Fill in the 2nd camera’s DDNS host not LAN IP 4) Enter the 2nd camera’s user name and password 5) Click Add button and to take effect NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP. 31-7-2014 ebode IPV58P2P...
  • Page 33 Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet. Figure 6.19 31-7-2014 ebode IPV58P2P...

  • Page 34: Network

    It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows: Control Panel--Network Connections--Local Area Connections --Choose Support--Details. Figure 6.21 31-7-2014 ebode IPV58P2P...
  • Page 35 It should also display your router in the list. Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than Figure 6.23 31-7-2014 ebode IPV58P2P...
  • Page 36 NOTE: If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. 6.3.3 PPPoE If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. 31-7-2014 ebode IPV58P2P...
  • Page 37 Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service. 31-7-2014 ebode IPV58P2P...
  • Page 38 After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. 31-7-2014 ebode IPV58P2P...
  • Page 39 Figure 6.28 Figure 6.29 Please create the domain name step by step according to instructions on www.no-ip.com 31-7-2014 ebode IPV58P2P...
  • Page 40 LAN IP address & HTTP Port No. of the camera within the router showed as below. Assign a Fill the Media Port no. of the name as you camera on the column of like here External Port and Internal Port Figure 6.30 31-7-2014 ebode IPV58P2P...
  • Page 41 HTTP port : By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21. Figure 6.33 31-7-2014 ebode IPV58P2P...
  • Page 42 Figure 6.34 and 6.35. Select which camera you’d like to change the port for, and right click Figure 6.34 Enter the Modify the Username and Http Port. password, click Figure 6.35 31-7-2014 ebode IPV58P2P...
  • Page 43 Here I can enter one of the following URLs in the VLC. Figure 4.1 rtsp://admin:123@192.168.1.11:88/videoMain Figure 4.2 rtsp:// @192.168.1.11:88/videoMain Figure 4.3 rtsp://:123@192.168.1.11:88/videoMain Figure 4.4 rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to Media. Open Network Stream option and enter URL into VLC. 31-7-2014 ebode IPV58P2P...
  • Page 44 Figure 6.37 Figure 6.38 31-7-2014 ebode IPV58P2P...
  • Page 45 Quick Installation Guide about How to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 31-7-2014 ebode IPV58P2P...
  • Page 46 4) Receiver: Mailbox for receiver need not support SMTP, you can set 4 receivers 5) Save: Click Save to take effect 6) Test: Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. 31-7-2014 ebode IPV58P2P...
  • Page 47 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server 7) The message is denied by the server. Maybe because of the anti-spam privacy of the server 8) The server does not support the authentication mode used by the device 31-7-2014 ebode IPV58P2P...
  • Page 48 Click Test to see if FTP has been successfully configured. 6.3.9 P2P Access the IP Camera by Smart Phone (Android or iOS operating system). First of all, you need to open the P2P function of the IP Camera at “Settings  Network  P2P”. Figure 6.45 31-7-2014 ebode IPV58P2P...

  • Page 49: Video

    Search and install the application named “ebode” on Google Play for Android devices, or on APP Store for iOS devices. If you want to know more details of the iOS APP or Android APP, see the iOS App User Manual or Android APP User Manual.
  • Page 50 Figure 6.48 There are two options: Yes or NO. Select Yes, then click “Set Privacy Zone” and draw a privacy area on the video, the privacy area will be black on the video. The privacy zone Figure 6.49 31-7-2014 ebode IPV58P2P...
  • Page 51 Image Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Alarm Pictures Save Path: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP automatically. 31-7-2014 ebode IPV58P2P...
  • Page 52 Here you can set the distortion correction. There are three options: Low, Medium, High. Figure 6.53 If you replace the lens, the image has found distortion, uneven and so on, you can modify the Select The Distortion Correction Parameter to calibration images. 31-7-2014 ebode IPV58P2P...

  • Page 53: Alarm

    3) Trigger interval: The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time. 4) Select the alarm indicators When the motion has been detected, the alarm status will turn to Detect alarm. Figure 6.55 31-7-2014 ebode IPV58P2P...
  • Page 54 5) Set Detection Area Click set Detection Area and it pop up a window, then you can draw the detection area. Click OK button after settings. When something moving in the detection area, the camera will alarm. Figure 6.56 31-7-2014 ebode IPV58P2P...
  • Page 55 TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. Figure 6.58 ③ Press the left mouse and drag it on the time boxes, you can select the serial area, Figure 6.59 31-7-2014 ebode IPV58P2P...

  • Page 56: Record

    On this page you can change the manually recording storage path, the default storage path is D:\ipc. Figure 6.60 6.6.2 Alarm Recording Figure 6.61 6.6.3 Local Alarm Recording On this page you can enable local alarm record, and select the local alarm record time. Figure 6.62 31-7-2014 ebode IPV58P2P...

  • Page 57: Ptz

    This page will allow you to change the pan/tilt speed and do RS485 settings. (Not available for this camera). 6.7.1 Pan/Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired pan/tilt speed type and click save button . Figure 6.64 31-7-2014 ebode IPV58P2P...

  • Page 58: Firewall

    IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect. 31-7-2014 ebode IPV58P2P...

  • Page 59: System

    Upgrade Firmware by IP Camera Tool Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. 31-7-2014 ebode IPV58P2P...
  • Page 60 5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 31-7-2014 ebode IPV58P2P...

  • Page 61: Appendix

    If abnormal, check the network connections. 7.1.1 How to install the plug-in for Safari Download the plug-in when you login your camera at the first time. Figure 7.1 31-7-2014 ebode IPV58P2P...
  • Page 62 Double click the plug-in to install it. Figure 7.2 Continue to finish the installation, and then it will be successful. Figure 7.3 Please check if the plug-in was successfully installed or not. Figure 7.4 Restart Safari to enable the plug-in. 31-7-2014 ebode IPV58P2P...
  • Page 63 Drag the download file to Firefox web page and it will prompt you to Install it. Click Install Now Figure 7.6 Reboot the Firefox after the plugin installation is successfully completely, then re-login the camera again, you can see the surveillance window. 31-7-2014 ebode IPV58P2P...
  • Page 64 7.1.3 How to download and install the ActiveX for Google Chrome users For the first time login the camera, it will prompt you to download the ActiveX. Figure 7.7 Download the plugin and drag it to the Extensions page of Google Chrome. Go to Extensions page Figure 7.8 31-7-2014 ebode IPV58P2P...
  • Page 65 Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE browser--Tool--Internet Proper--Security--Custom Level--ActiveX control and Plug-ins. Three options of front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows: 31-7-2014 ebode IPV58P2P...
  • Page 66 Don’t use port 8000. Figure 7.11 Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 31-7-2014 ebode IPV58P2P...
  • Page 67 Finder menu bar click Go  Go to Folder. Copy then paste the following: Library/Internet Plug-Ins. Click Go then move to the Internet Plug-Ins. Find the fsIPCam.bundle file, and delete it. Camera will prompt you to install the latest one when next logging. 31-7-2014 ebode IPV58P2P...
  • Page 68 Add-ons. Find the npIpcam 2.0.1.x, and click the Remove button to delete it. Please follow a restart to take the change effect. Camera will prompt you to install the latest one when next logging. 31-7-2014 ebode IPV58P2P...

  • Page 69: Default Parameters

    (320 x 240) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Night visibility 12pcs IR-LEDs, night vision range up to 20 metres 31-7-2014 ebode IPV58P2P...
  • Page 70 Operating Humidity 20% ~ 85% non-condensing Environ Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) ment Storage Humidity 0% ~ 90% non-condensing Certifi CE, FCC, RoHS cation Power adapter should be used between -20℃-40℃, and 20%-90% relative humidity. 31-7-2014 ebode IPV58P2P...

  • Page 71: Ce & Fcc

    This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Questions? Please visit our website www.ebodeelectronics.eu for FAQ and our contact details. 31-7-2014 ebode IPV58P2P...
  • Page 72 DECLARATION OF CONFORMITY Hereby, ebode electronics, declares that this ebode IPV58P2P is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic...
  • Page 73 Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okreslonymi Dyrektywą UE: 1999/5/EC 31-7-2014 ebode IPV58P2P...
  • Page 74 & play. The products provide you with comfort in your home, help you to avoid wires, and make sure you can stream your personal audio and video to where ever you want to look or listen to it. For more ebode products and information, please visit www.ebodeelectronics.eu.
  • Page 75 & play. The products provide you with comfort in your home, help you to avoid wires, and make sure you can stream your personal audio and video to where ever you want to look or listen to it. For more ebode products and information, please visit www.ebodeelectronics.eu.
  • Page 76 31-7-2014 ebode IPV58P2P...

Table of Contents