Ebode IPV68P2P User Manual page 44

10.3.5 UPnP
The default UPnP status is closed. You can enable UPnP, then the camera's software will
be configured for port forwarding. Back to the "Device Status" panel, you can see the
UPnP status:
The camera's software will be configured for port forwarding. There may be issues with
your routers security settings, and sometimes may error. We recommend you configure
port forwarding manually on your router.
10.3.6 Port
This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If
you want to access the camera and view the video, the HTTP Port must both be
configured correctly.
HTTP port: By default, the HTTP port is set to 88. Also, they can be assigned with
another port number between 1 and 65535. But make sure they can not be conflict with
other existing ports like 25, 21.
24-9-2015
Figure 10.32
Figure 10.33
Figure 10.34
44 ebode IPV68P2P